Stud Index

Self-Clinching Studs

Partially / Fully Threaded Weld Shear Stud

Specification:Coarse serration at the head

Material: Steel, tempered, galvanized, yellow chromated

Tolerances:ISO 2768-m, length tolerance +/- 0.4 mm

Thread:Stud thread A: as per ISO 6g, imperial thread available in all customary sizes

C.D. Weld Studs

Standard: DIN EN ISO 13918

Size Range: Día 3mm to 8mm, Length: 6mm to 50mm

Material: : Steel & A2-70 Stainless Steel

Finish: Copper Coated & Self

Buy Now

Full Threaded Rods/Studs

Standards: DIN 975,976 1B

Mechanical Properties: 8.8, 10.9, ASTM B7

Surface Treatment: Black Oxide.

Half Thread Stud

Standards: DIN 939,835Fo

Mechanical Properties: As Per Customer Specifications

Surface Treatment: As Per Customer Specifications

Buy Now

All Thread Rod Studs

Standards: ANSI/ASME

Size: from 1/4 to 4 inches (M8 to M48)

Materials: A193 B7/A194 2H, A193 B7M/A194 2HM, A193 B8/A194 8, A193 B8M/A194 8M, A193 B16/A194 4/7, A320 L7/A194 4/7, A320 L7M/A194 7M . A2 , A4

Surface: black, galvanized, nickel, cadmium, stainless steel

Partially / Fully Threaded Weld Shear Stud

Specification:All Partially Threaded weld studs consist of mild steel and are manufactured in accordance with the requirements of BS EN ISO 13918:2008

Material: Low Carbon Steel (MS), Stainless Steel A2-50

Mechanical Properties: (as cold drawn)

U.T.S. 55,000 psi min.

Elongation in 2” --------------------------20% min.

Nelson Shear studs

Specification: All shear studs consist of mild steel and are manufactured in accordance with the requirements of BS EN ISO 13918:2008.

Material: Low Carbon Steel – ASTM A-29, A.I.S.I. -1010 through 1020.

Mechanical Properties: (as cold drawn)

Ultimate Tensile Strength ---- 65,000 psi min.

Elongation in 2” --------------------------20% min.

CALL US FOR ANY QUERY:

011-49098640

Stud Index